6. Additional operations

A : Disc brake bore diameter :

• Nominal diameter : 172/172,15 mm
• Maximum permitted diameter after wear : 173 mm

Brake shoe lining : Min. permissible thickness = 1,5 mm.

6. Additional operations

Refit :

• The rear brake disc
• The bolts (3)

Tighten the bolts (3) to 1,2 ± 0,1 daN.m.

Position the brake caliper (2).

Refit the bolts (1) (new) (pre-coated with a thread locking product).

Tighten the bolts (1) to 16 ± 0,5 daN.m.

Fit the brake pads (see the relevant operation).

Apply the brakes, with the engine running, several times before driving the vehicle.

Check the operation of the brakes.

Refit the rear wheels.

Return the vehicle to its wheels.

Tighten the wheel bolts [info icon].