3. Refitting

Figure : B2CP498D

Remove the fixing screws of the mounting (14).

Uncouple :

• The ball joint (12); Using tool [0216-G2]
• The ball joint (15); Using tool [0216-G1]

Remove :

• The cable stops (13)
• Gear selection and engagement control cables (3), (4)
• The bracket (14)

Figure : B2CG2PRD

Unclip and remove the gear control top dead centre sensor (16) (at "a") (according to equipment).

3. Refitting

3.1. In the vehicle

Refit :

• Gear selection and engagement control cables (3), (4)
• The fixing plate assembly (11)
• The nuts (9)
• The evaporator condensation discharge pipe (10) (according to equipment)
• The gear control top dead centre sensor (16) (at "a") (according to equipment)
• The bracket (14)
• The sleeve stops (13)
• The ball-joints (12), (15)
• The fixing screws of the mounting (14)
• The central glovebox lower trim (8)