Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)19 · 19 Gearbox
19 · Transmission

2. Removing : Primary and secondary shafts (page 3 of 4)

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Manual gearbox: dismantling
19 Gearbox2. Removing : Primary and secondary shafts · page 3 of 4

Figure : B2CM031D

Remove :

  • The rocking lever shaft (14)
  • The centring pin (15)
A pair of hands removing the reverse gear rocker lever assembly (16) and reverse gear fork (17) from a manual gearbox, with callout 'a' indicating a pin on the lever.

Figure : B2CM032D

Remove the reverse gear rocker lever (16) /reverse gear fork (17) assembly.

N.B. : Raise the reverse gear rocker lever vertically to the pin "a"; Release the assembly by pulling it towards you.

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.