2. Removing : Primary and secondary shafts (page 4 of 4)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Manual gearbox: dismantling
19 Gearbox2. Removing : Primary and secondary shafts · page 4 of 4
Figure : B2CM033D
Remove the 5 gear control plate (19) bolts (18).
CAUTION : During this operation, take care not to scratch the joint face of the casing.
Lift the gear control plate (18) and disengage the centring pins.
Engage 2nd, 4th and 6th gears.
Parts & tools for this job For 2006 Fiat Ducato
- PARTClutch kitSearch: Fiat Ducato 2006 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Ducato manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.