3. Preliminary operations

Figure : B2FH00SD

The drive shafts are identified by a label stuck to the shaft (at "a") containing : The supplier reference.

List of suppliers :

• GKN
• PSA
• NTN

3. Preliminary operations

N.B. : The ABS crowns are discontinued (the function fulfilled by the crowns is transferred to the front wheel bearings).

Remove the drive shafts.

Support the drive shaft in a vice fitted with soft jaws.

N.B. : Before removal : Mark the positions of the driveshaft gaiters.

4. Replacement : Wheel end gaiter

CAUTION : Always replace the clips and circlips that have been removed.

4.1. PSA and NTN driveshafts