BADGE ON TAILGATE - R.R.

Operation 7055A83 · EXTERIOR MOULDINGS

from 06/04

Removing

• Using a plastic blade, remove the badge (1a) unsticking the double-sided tape (1b) around the perimeter and releasing the centering pins (1c).

Refitting

• Check that the badge is not damaged.

• Clean the housing for the badge, removing the residual adhesive and degrease with heptane.
• Remove the protective film (2a) for the double-sided tape and place the badge (2b) in position, engage the retainers (2c) and fit it.

This operation should be carried out at a temperature above 20°C.