Climate control recirculation not working
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Climate control › Climate control recirculation not working
Fault diagnosisClimate control recirculation not working
CLIMATE CONTROL RECIRCULATION NOT WORKING
The recirculation function is not working properly
| Results of the tests | ||||
| 1 | RECIRCULATION MOTOR ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
Check, in order:
| Continue to Step 2 | Connections not correct | Restore the connections | |
| Motor defective | Replace motor Op. 5040D52 | |||
| Air recirculation control defective | Change control unit Op. 7065C10 | |||
| 2 | RECIRCULATION FLAP CHECK | All OK | Problems met | Operation |
| Check that the recirculation flap moves freely | Continue to Step 3 | Flap blocked or defective | Restore the flap to working order or replace Op. 5040C24 | |
| 3 | CHECKING CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Search for the fault starting from another symptom' | |
Parts & tools for this job For 1998 Fiat Multipla
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Fiat Multipla 1998 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.