Gearbox and differential
- Make
- Fiat
- Model
- Panda (141) Factory Service Manual
- Year
- 1986–2003
- Section
- Drive shafts › Gearbox and differential
21 Gearbox and differentialGearbox and differential
Gearbox and differential
Drive shafts
Removing-refitting constant velocity joint
NOTE If there appears to be anything wrong with the joint, replace it.
Before fitting the constant velocity joint, insert the boot in the drive shaft
Checking drive shaft
Check that there are no distortions and that the contact surfaces of the seal are not worn.
Fitting constant velocity joint boot
Cover both the constant velocity joint and the boot with TUTELA MRM2 grease
Parts & tools for this job For 1986 Fiat Panda
- PARTWheel bearingSearch: Fiat Panda 1986 wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Fiat Panda 1986 cv boot kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.