Emgine oil intake duct - r r

Operation 1084B26 · Engine oil lubrication circuit

1.1

Removing

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

1.1 · Air Conditioner

Removing

- 1020A26 crankcase sump - r r clean mating surfaces and apply sealant for vehicle with air conditioner

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

1.2 8v

Removing

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

1.2 8v · Air Conditioner

Removing

- 1020A26 crankcase sump - r r clean mating surfaces and apply sealant for vehicle with air conditioner

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

1.3 JTD 16v

Removing

Remove the car from the ramps.

Disconnect the battery negative terminal.

- 0010T84 coolant for air conditioning system dehydrate and recharge

- 1088B10 engine cooling tank - r + r

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1008A47 rigid power-unit mount - timing side - r r for versions with air conditioner

- 4450B04 right front wheel r r

- 1092G11 Engine components single drive BELT - R.R. for versions with air conditioning

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 2110A60 manual gearbox/engine coupling bracket - r+r

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 1020B12 TIMING COVER with drive chain - R.R. and REPLACE. gasket for versions with air conditioning

1. At the bench, undo the bolts (1a) and separate the engine oil inlet duct (1b) complete with gasket (1c) from the timing cover.

1.1

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 0010T12 engine oil and filter replace

1.1 · Air Conditioner

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

- 1020A26 crankcase sump - r r clean mating surfaces and apply sealant for vehicle with air conditioner

- 0010T12 engine oil and filter replace

1.2 8v

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 0010T12 engine oil and filter replace

1.2 8v · Air Conditioner

Refitting

- 1084B28 engine oil intake pump - r + r with crankcase sump removed

- 1020A26 crankcase sump - r r clean mating surfaces and apply sealant for vehicle with air conditioner

- 0010T12 engine oil and filter replace

1.3 JTD 16v

Refitting

Place the engine oil inlet duct, complete with gasket, back in its housing on the timing cover and secure it using the bolts.

- 1020B12 TIMING COVER with drive chain - R.R. and REPLACE. gasket for versions with air conditioning

- 1020A20 crank case oil sump - r + r clean seals for sealant application

- 2110A60 manual gearbox/engine coupling bracket - r+r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1092G11 Engine components single drive BELT - R.R. for versions with air conditioning

- 4450B04 right front wheel r r

- 1008A47 rigid power-unit mount - timing side - r r for versions with air conditioner

- 1008B10 power unit front mount (timing side) flexible block - replace

- 1088B10 engine cooling tank - r + r

- 0010T11 engine oil check level and top up

- 0010T20 coolant change

- 0010T84 coolant for air conditioning system dehydrate and recharge

Remove the car from the ramps.