Engine oil delivery pipe to turbocharger - r + r

Operation 1084B40 · Engine oil lubrication circuit

1.3 JTD 16v

Removing

Disconnect the battery negative terminal.

1. Disconnect the electrical connection from the air flow meter.

2. Loosen the band and disconnect the air inlet hose to the turbocharger.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Undo the connectors (1a) and remove the engine oil supply pipe to the turbocharger (1b).

Refitting

1. Fit the engine oil supply pipe to the turbocharger (1a) in position and secure by tightening the connectors (1b) to the recommended torque.

Fit the air filter complete with air flow meter in place.

Connect the air inlet hose to the turbocharger and tighten the band.

Connect the electrical connection to the air flow meter.

Connect the battery negative terminal.