COMPRESSOR ENGAGEMENT - Description
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Climate control system › COMPRESSOR ENGAGEMENT - Description
Wiring diagrams and electrical functionsCOMPRESSOR ENGAGEMENT - Description
COMPRESSOR ENGAGEMENT - Description
Description
A special button enables the operation of the air cooling circuit; but the actual switching on of the compressor also depends on the intervention of:
- the fan linear sensor, located in the refrigerant circuit, which stops the air conditioning being switched on if the pressure of the fluid is too low or too high;
- the engine control unit which, depending on the engine management logic, excludes the operation of the compressor; for example, in the case of high engine temperatures or high engine load (sudden acceleration);
- information coming from the anti-frost thermostat on whether there is condensation on the air conditioning pipes (for versions with manual air conditioner);
- information coming from the climate control system (for versions with automatic air conditioner).
The compressor supply circuit is controlled by a specific relay, located in the engine compartment junction unit; the relay supply line is protected by a specific fuse.
Parts & tools for this job For 2003 Fiat Panda
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Fiat Panda 2003 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.