Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)20 · Wiring diagrams and electrical functions
20 · Electrical

HEATER - Description

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Climate control system › HEATER - Description
Wiring diagrams and electrical functionsHEATER - Description

HEATER - Description

Description

The vehicle climate control system involves a duct/distributor unit with a heater, controlled via the knobs in the dashboard:

  • the left knob mechanically controls the mixture flap between hot and cold air;
  • the right knob, mechanically operated via a cable, controls the opening of the flaps which regulate the distribution of air flows;
  • the two central knobs control the following: one knob electrically controls the air ventilation at four differente speeds, the other mechanically controls the function of air recirculation in the interior compartment, via a flexible cable.

The different fan speeds are controlled by a resistive divider.

The control panel is lit up when the side lights are on.

The whole system is protected by specific fuses, housed in the junctions units in the engine compartment and under the instrument panel. A specific relay controls the switching on of the fan.

The fan can only be switched on when the ignition is on.

Parts & tools for this job For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.