Timing diagrams (page 2 of 2)
- Make
- Fiat
- Model
- Punto (176) Factory Service Manual
- Year
- 1993–1999
- Section
- Engine ('97 range)
00 Introduction and technical dataTiming diagrams · page 2 of 2
| LUBRICATION | 1242 16v | |
|---|---|---|
| Values in mm | ||
| Engine lubrication system | forced via, via lobe gear pump with cartridge filter in series |
|
| Oil pump | lobe gears | |
| Pump operated | through crankshaft | |
| Oil pressure relief valve | incorporated in crankshaft front cover | |
between pump casing housing and driven gear |
0,100 ÷ 0,210 | |
between the upper side of the gears and the pump cover |
0,025 ÷ 0,070 | |
| Full flow filter | cartridge | |
| Insufficient oil pressure sender unit | electrical | |
Operating pressure at a temperature of 100°C |
idling > 0,7 bar at 4000 rpm > 4 bar |
|
Oil pressure relief valve spring |
P1 | 4,54 ÷ 5,04 daN |
| H1 | 34,1 |
Original page

Parts & tools for this job For 1993 Fiat Punto
- PARTEngine gasket setSearch: Fiat Punto 1993 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.