Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Partial replacements (1242 16v) › Refitting
10 EngineRefitting
Diagram showing engine components with callout number 1
Diagram showing power steering pump area with tool 1895762000 and callout number 2
Diagram showing alternator with arrows pointing to bolts on the bracket, callout number 3
  1. Remove the power steering pump pulley guard, then take off the drive belt.

Refitting

  1. Tension the power steering belt by adjusting the bolts retaining the pump bracket. Use tool 1895762000 to check that new belt tension is 36 - 45 daN. The tension should be 23 - 30 daN if the same belt is refitted

Alternator drive belt

Diagram showing alternator drive belt area with arrows pointing to screws and rear bolt, callout number 4
  1. After removing the auxiliary drivebelt, remove the alternator pulley protective cover.
  2. Slacken the alternator drive belt by adjusting the screws shown in the figure and the rear bolt retaining the belt to the alternator bracket.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.