Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting coolant pump

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Partial replacements (1242 16v) › Removing-refitting coolant pump
10 EngineRemoving-refitting coolant pump · page 1 of 2

REMOVING-REFITTING COOLANT PUMP

Diagram showing the lower part of the radiator and coolant sleeve connection point

P3M21AX01

  1. Position the car on a lift, disconnect the battery negative terminal and drain the coolant by disconnecting the sleeve shown from the lower part of the radiator.

Remove the timing belt as described previously.

Diagram showing the coolant pump with arrows indicating the fastenings to be undone

P3M28AX01

  1. Remove the coolant pump by undoing the fastenings shown in the figure.

Refit the parts removed previously and adjust timing belt tension as described previously.

REMOVING-REFITTING RADIATOR

Diagram showing the radiator and its connecting pipes at the lower section of the engine bay

P3M28AX02

Position the car on a lift, disconnect the battery negative terminal and then proceed as follows:

  1. Drain the coolant by disconnecting the pipes shown in the figure.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.