Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting coolant pump (page 2 of 2)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Partial replacements (1242 16v)
10 EngineRemoving-refitting coolant pump · page 2 of 2
Diagram showing the filter case assembly with arrows pointing to retaining bolts and a clip
Diagram showing a hose sleeve connected to the upper part of the radiator, with arrows indicating connection points
Diagram showing the cooling fan assembly secured to the radiator, with arrows pointing to bolts, supply connections, and a pipe from the expansion tank
1. Remove the filter case assembly by undoing the retaining bolts and clip shown. 2. Disconnect the sleeve shown in the figure from the upper part of the radiator. 3. Remove the cooling fan by unscrewing the bolts securing it to the radiator and disconnecting the supply connections. Then disconnect the pipe indicated from the expansion tank. 4. Unscrew the bolts fastening the radiator to the condenser and lift out the radiator.
Diagram showing the radiator and condenser assembly with arrows pointing to the bolts fastening them together

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.