Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)02 · 10 Engine
02 · Engine

Removing-refitting inlet manifold (page 2 of 2)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Partial replacements (1242 16v)
10 EngineRemoving-refitting inlet manifold · page 2 of 2
Diagram showing the fuel manifold and injectors with retaining bolts
Diagram of the heater outlet pipe connection labeled 1
Diagram illustrating the intake manifold, oil dipstick bracket, and injection leads
  1. Unscrew the bolts retaining the fuel manifold, remove together with injectors and place outside the working area.
  2. Disconnect heater outlet pipe and connection (1).
  3. Undo intake manifold retaining nuts and release the engine oil dipstick from its bracket.
  4. Pull out the intake manifold slightly and release the injection leads from the rear by unscrewing the retaining bracket bolts.
  5. Then remove the upper part of the intake manifold.
Diagram showing arrows pointing to the injection lead retaining bracket bolts on the rear of the intake manifold
Diagram showing the upper part of the intake manifold being removed from the engine

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.