Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)06 · 41 Steering
06 · Steering & suspension

Dismantling-fitting

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Steering gear › Dismantling-fitting
41 SteeringDismantling-fitting
Fitting bolts securing steering gear to sub-frame, and tightening them to specified torque

7 daNm

Fitting bolts securing steering gear to sub-frame, and tightening them to specified torque

DISMANTLING-FITTING

Dismantling-fitting tie-rod complete with end ball joint
End ball joint of the tie-rod

Dismantling-fitting tie-rod complete with end ball joint

Check that there is no stiffness or excessive play on the ball joint, otherwise it must be renewed.

Dismantling-fitting protective gaiter and seal
Protective gaiter and seal component
Protective gaiter removed from the tie-rod
Protective gaiter being fitted onto the tie-rod

Dismantling-fitting protective gaiter and seal

Carefully check that the gaiter has no holes or tears, otherwise it must be renewed.

Before fitting the final gaiter (pinion side), insert the specified quantity of grease.

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.