Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Punto (176) Factory Service Manual (1993-1999)06 · 41 Steering
06 · Steering & suspension

Removing-refitting lower column from steering pinion

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Steering gear › Removing-refitting lower column from steering pinion
41 SteeringRemoving-refitting lower column from steering pinion · page 1 of 2
View of the steering column lower section and connection point

Before removing and refitting the steering gear, drain the fluid from the reservoir.

NOTE The old fluid should not be reused. Top up the level with fresh fluid.

Removing-refitting lower column from steering pinion

Remove the nut and bolt securing the lower coloumn to the steering pinion.

Close-up view of the power steering fluid pipe bracket and securing bolt

Dismantling-fitting bolt which secures power steering fluid pipe bracket

View of the front suspension showing tie-rods and steering link on vertical link

Removing-refitting right and left tie-rods on steer-ing link on vertical link

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.