Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing-refitting front pillar cover

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Interior fittings › Removing-refitting front pillar cover
70 BodyworkRemoving-refitting front pillar cover
View inside the glove compartment showing wiring and connectors

P3M038M01

The rear side of the courtesy light assembly with mounting points

P3M038M02

  • disconnect the connectors shown and remove the courtesy light.
Close-up of a bolt fixing on the front pillar cover
A hand releasing and removing the front pillar cover from its fixings
The removed front pillar cover component

Removing-refitting front pillar cover

  • Undo the bolt fixing the cover (left inset);
  • release and remove the cover from the fixings (right inset).
A hand removing the handle fixing cover from a grab handle
A hand undoing the fixing bolts underneath the grab handle to remove it
The removed front or rear passenger grab handle component

Removing-refitting front and rear passenger grab handles

  • Remove the handle fixing covers (left inset);
  • undo the fixing bolts underneath, then remove the handle (right inset);

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.