Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing-refitting heater panel

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Interior fittings › Removing-refitting heater panel
70 BodyworkRemoving-refitting heater panel
Gear lever area showing the trim and inset with arrows pointing to fixing bolts
  • loosen the fixing bolts shown in the inset;
  • lift up and remove the gear lever trim;
Centre tunnel cover tray being rotated to disconnect a connector
  • rotate the tray and disconnect the supply connector for the cigar lighter;
  • remove the centre tunnel cover tray from the vehicle;
Hand extracting a centre knob from the heater panel with arrows indicating fixing bolts

Removing-refitting heater panel

  • Extract the centre knob, then undo the fixing bolts shown in the diagram;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.