Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Removing-refitting front seat

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Seats (Cabrio) › Removing-refitting front seat
70 BodyworkRemoving-refitting front seat · page 1 of 2

REMOVING-REFITTING FRONT SEAT

Before starting to remove the seat, observe the procedure described below to avoid activating the seat belt pre-tensioner.

Diagram showing the front seat area with arrows indicating bolts on the seat base and underdoor lining.
  • Insert the safety clip in the special slit in the seat belt pre-tensioner;
  • remove the inner underdoor lining, acting on the bolts shown;
Close-up diagram of the seat rail and pre-tensioner lining with arrows pointing to fixing bolts.
  • remove the fixing bolts and extract the pre-tensioner lining;
Diagram of the front seat showing arrows pointing to the front bolts fixing the seat to the floor panel.
  • undo the front bolts fixing the seat to the floor panel;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.