Order of operations (page 3 of 3)

NOTE During this period it is possible to let water flow over the glass to locate any possible areas of penetration and accelerate the polymerization of the sealant.

• eliminate any possible sealant which has overflowed into the inside of the pillars when the sealant has hardened, cutting it with a blade and removing it with tweezers;

Take care not to damage the serigraphed area of the glass with the blade.

• complete the refitting of the removed elements, reversing the order of the operations carried out for the removal, then clean the glass.

The vehicle should not be returned for at least 20 hours after the glass has been stuck.

Sections of third fixed window