Order of operations

Use a cloth to protect the dashboard and the parts which could be damaged during the operations of cutting and fitting the window glass.

Before commencing the operation of replacing the window glass, disconnect the negative battery lead, remove the components which could cause an obstruction during the operation of replacing the window glass and in particular:

• - courtesy light and sun visors;
• - front pillar covers;
• - passenger grab handle and driver's side fixing trims.

Lower the roof lining at the front and move it away from the roof, then proceed as described below:

Order of operations

• - Remove the fixing covers, then undo the nuts and remove the windscreen wiper blades;

• - undo the bolts shown and remove the lower window glass trim;

• - remove the door seal and window glass perimeter trims;