Workshop Manuals Factory service & repair Fiat
Fiat Punto (176) Factory Service Manual (1993-1999)10 · 70 Bodywork
10 · Body & interior

Order of operations (page 5 of 7)

Make
Fiat
Model
Punto (176) Factory Service Manual
Year
1993–1999
Section
Window glasses
70 BodyworkOrder of operations · page 5 of 7
Two people handling a large windscreen glass panel, positioning it with suction pads.
  • temporarily place the window glass in position using the special suction pads;
Diagram showing the lower part of the windscreen with sliding retaining mountings and an inset detail of a mounting clip.
  • check that the sliding retaining mountings, located in the lower part of the glass, keep the windscreen in the correct position;
Close-up of the edge of the windscreen where adhesive tape has been applied to mark the alignment between the glass and the housing.
  • when the glass is correctly aligned, mark the position of the glass and the housing with a strip of adhesive tape;
  • cut the strips of adhesive tape and remove the window glass;

Parts & tools for this job For 1993 Fiat Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.