Order of operations (page 3 of 7)

• remove the window glass from its housing, using the special clamps;

The help of a second operator is required to remove the window glass.

• using a thermal knife and special blade, level the sealant remaining in the window glass housing in the vehicle;
• after the operation of levelling the sealant, the window glass housing must be thoroughly cleaned using compressed air and then completely degreased using heptane and disposable paper;

NOTE If the window glass is being refitted, all traces of the old sealant must be removed before applying the new sealant.

• remove the old sealant using the thermal knife and special blade;
• scrape the remaining residues of sealant using a special scraper, taking care not to damage the serigraphed area of the glass;