Order of operations (page 4 of 7)

after levelling the sealant, the serigraphed area of the window must be thoroughly degreased using heptane and disposable paper;

fit the trim along the perimeter of the window glass, avoiding touching the area which has been previously degreased;

• clean the serigraphed area using a wad of paper soaked in de-greasing adhesion promoter (upper inset);
• using a special wad, apply the adhesion promoter taking care not to come outside the serigraphed area (lower inset);

NOTE Leave the adhesion promoter to dry at ambient temperature for at least 15 minutes and not more than 24 hours.