Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 33 Braking system04 41 Steering05 50 Subsidiary components06 55 Electrical equipment07 70 Bodywork
Fiat Scudo Factory Service Manual (1996-2006)07 · 70 Bodywork
07 · Body & interior

Removing - refitting roof lining

Make
Fiat
Model
Scudo Factory Service Manual
Year
1996–2006
Section
Interior fittings › Removing - refitting roof lining
70 BodyworkRemoving - refitting roof lining
Diagram showing the sun visor and its fixing bolts
Diagram showing a tool prying off the courtesy light cover

REMOVING - REFITTING ROOF LINING

  1. Undo the bolts shown and remove the sun visor with the relevant strikers.

NOTE This operation should be repated for the passenger side sun visor

  1. Remove the courtesy light which is a press fit;
  2. disconnect the electrical connector then remove the courtesy light from the vehicle;
  3. move the two fixing covers aside and re-move the passenger grab handle acting of the fixings underneath;
  4. Remove the door housing trim, remove the fixing buttons, then extract the roof lining from the vehicle.
Diagram showing a hand removing the courtesy light assembly
Diagram showing the passenger grab handle and its fixing bolts
Diagram showing the rear interior view with arrows indicating the roof lining extraction points

Parts & tools for this job For 1996 Fiat Scudo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.