Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Cylinder head (1108) › Refitting
‹ Prev 1016a - tappet covers overviewNext › 1016c - single cylinder head - removal and refit overview
10 EngineRefitting
(Cont. Op. 1016A20)
Refitting
- Fit the new gasket.
- Fit the tappet cover.
- Tighten the cover screws to the correct torque
| Fastening | Component | Ø | Value (daNm) |
|---|---|---|---|
| Screw | TAPPET COVER | M6 | 0.8 |
- Insert the oil vapours recirculation pipe.
- Complete with Op. 1048A10 COMPLETE AIR CLEANER - R+R.
- Connect the negative (-) battery terminal
| Name | Connector |
|---|---|
| Battery | A1 |
- Remove the body protection cover.
- Close the engine compartment.
‹ Prev 1016a - tappet covers overviewNext › 1016c - single cylinder head - removal and refit overview
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.