Manufacturing features
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Description and operation: Braking system › Manufacturing features
33 Braking systemManufacturing features · page 1 of 3
| Ref. | Description | Grp. |
|---|---|---|
| 1 | DISC WHEEL BRAKES (*) | 3310 |
| 2 | DRUM WHEEL BRAKES (*) | 3320 |
| 3 | HYDRAULIC BRAKE SYSTEM (*) | 3330 |
| 4 | ANTI-LOCKING SYSTEM (ABS) | 3340 |
| 5 | HANDBRAKE (*) | 3380 |
(*): Subgroup not described
MANUFACTURING FEATURES
The braking system presents a double, crossed circuit which ensures braking action on both vehicle sides in the event of circuit failures.
Each circuit acts on a front wheel and on the diagonally opposite rear wheel.
The front brakes present discs (diameter 257 mm) and Bendix V floating callipers on single column with self-lubricating rubber bushing to prevent knock noise.
The rear brakes are drum brakes.
The brake booster is 8" and the brake cylinder is 7/8".
Original page
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.