Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Installation

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Petrol injection fuel supply (1108 Euro 3) › Installation
10 EngineInstallation
Diagram of engine components showing sender unit connections labeled 1a, 1b, and 1c

1108 Euro 3

  1. Disconnect the electrical connector for the sensor.
DescriptionConnector
1Data not yet availableK36
  1. Undo and remove the sender unit.
Diagram showing the sender unit (1) and fixing bolt (2) being removed from the engine

Installation

1108 Euro 3

  • Tighten the engine coolant temperature sender unit to torque.
MountingComponentØValue (daNm)
-TransmitterCOOLANT TEMP SENSORM163.4
  • Connect the electrical connector for the sender unit.
DescriptionConnector
-Data not yet availableK36
  • See Op. 1048A10 Air cleaner filtering element - replace
  • Connect the battery negative terminal.
DescriptionConnector
-BatteryA1
  • Close the bonnet lid.

1108

1056B51 - CAM ANGLE SENSOR R + R

Removal

1108 Euro 3

  • Open the bonnet.
  • Disconnect the battery negative terminal.
DescriptionConnector
-BatteryA1
  1. Disconnect the electrical connector for the sensor.
DescriptionConnector
1Timing sensorK47
  1. Undo the fixing bolt (2a) and remove the sensor (2b).
Diagram showing the timing sensor (1), fixing bolt (2a), and sensor body (2b) on the engine

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.