Ing controls

ING CONTROLS

(Cont.d Op.2180A14)

• Lower the vehicle.
• Withdraw the mileage recorder transmission from the fastening clamp.

1. Partially prise off the engine compartment seal.
2. Slacken the screws (2a) of the sound-deadening cover (2b) and remove it.

1. Remove the mileage recorder transmission cover.
2. Remove the mileage recorder complete transmission.

Reassembly

• Re-position the mileage recorder complete transmission in the engine compartment
• Fit the mileage recorder transmission cover.
• Assemble the sound-deadening cover and fasten it with its screws.
• Fit the engine compartment seal on the sound-deadening cover.
• Insert the mileage recorder transmission in the fastening clamp
• Raise the car.
• Connect the mileage recorder transmission on the gearbox side
• Lower the vehicle.
• Connect the battery (-) terminal

• Remove the protective coverings from the car body.
• Close the engine compartment.
• Remove the car from the car lift.

2180A28 - SUPPORT FOR MILEAGE RECORDER CONTROL ON GEARBOX - R+R.

Removal

• Set the car on a lift and raise it

1. Disconnect the mileage recorder transmission on the gearbox side.
2. Slacken the stopper screw of the mileage recorder control support.
3. Withdraw the mileage recorder control support.

Reassembly

1. Insert the mileage recorder control support (1a) complete with seal ring (1b) directing it so that the hole (1c) corresponds with the seat of the fastening screw.
2. Tighten the screw fastening the mileage recorder control support to the specified torque

(Cont.d)