Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)06 · 33 Braking system
06 · General

3320b10 - rear drum brakes - r.r.

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Drum brakes › 3320b10 - rear drum brakes - r.r.
33 Braking system3320b10 - rear drum brakes - r.r. · page 1 of 2

3320B10 - REAR DRUM BRAKES - R.R.

  • Refer to Op. 3320B20 Rear brake shoe control CYLINDER (one) LH or RH - Replacing - Bleeding.
  • Refer to Op. 3320B30 Rear brake DRUM (one) LH or RH - R.R.

3320B20 - REAR BRAKE SHOE CONTROL CYLINDER (ONE) LH OR RH - REPLACING - BLEEDING

Removal

  • Position the vehicle on a shop jack.
  • Check the handbrake is not engaged.
  • Perform Op. 4450B11 Rear WHEEL (one) - R.R.
  1. Suck brake fluid from the reservoir with a syringe.
Diagram showing a hand using a syringe to extract fluid from the rear brake cylinder bleeder valve, labeled 1
  • Remove the protection cap from the rear brake cylinder bleeder valve.
  1. Insert a clear plastic tube in the bleeder valve.
  2. Place the other end in a container.
Diagram showing a syringe connected via a tube to the bleeder valve, with fluid being drawn into a container labeled 2; the connection point is labeled 1
  • Unscrew the rear drum brake bleeder valve.
  • Push the brake pedal down completely.
  1. Remove the screw.
  2. Remove pin (2a) and remove the rear brake drum (2b).
Diagram showing a hand removing a pin labeled 2a from a brake drum assembly labeled 2b, with a tool pointing at location 1

(Cont..)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.