Graphic subgroup contents
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Description and operation: Front suspension › Graphic subgroup contents
44 Suspension and wheelsGraphic subgroup contents · page 1 of 2
GRAPHIC SUBGROUP CONTENTS
| Ref. | Name | Grp |
|---|---|---|
| 1 | DAMPERS AND FRONT SPRINGS (*), 4410A | 4410A |
| 2 | FRONT SUSPENSION WISHBONES (*), 4410B | 4410B |
| - | STABILISER BAR AND ANCHOR STRUTS (*), 4410C | 4410C |
(*): Subgroup not described
DESCRIPTION
Mc Pherson type to independent wheels optimised to offer comfort and driving safety.
The main front suspension components are:
- coil springs heavily offset in relation to the damper axis to reduce sliding friction. The springs rest on plates with rubber rings in between to prevent operating noise.
- double-acting hydraulic dampers and the adoption of a rebound spring to improve stability when cornering.
- "cellasto" buffer which comes into action very gradually to improve comfort and gradual response when cornering.
- wishbones in nodular cast iron
- stabiliser bar (sports version only) anchored to the wishbones by flexible blocks.
Original page
Parts & tools for this job For 1998 Fiat Seicento
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat Seicento 1998 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.