Radio functions

An optional sound system with removable front panel, radio and cassette tape play-back can be installed in the vehicle.

The radio functions include:

• TA (traffic announcement)
• PTY (alarm 31)
• REG (regional programmes)
• RDS (automatic search of pre-set station)
• PI (program identification)
• automatic scan seeking pre-set stations
• frequency band selector (FM1, FM2, FM3, MW1, MW2, LW)
• pre-set station tuning /up to 6 pre-set stations for each frequency band
• automatic/manual tuning (up - down).

The cassette tape play-back device presents the following features:

• autoreverse function
• tape fast forward and reverse.

Audio settings present the following features:

• treble/bass setting
• left and right-hand speaker balance
• front and rear speaker balance (where relevant)
• loudness (bass enhancement at low volume).

Radio functions

0. ON/OFF.
1. Volume up.
2. Volume down.
   (these functions can be accessed by pressing the buttons briefly or keeping the buttons pressed for direct adjustments).
3. Bass adjustment button, balance between left and right-hand channels, MODE to show the selected frequency on the display.
   (Press button for less than 5 seconds).
4. Treble adjustment button, FADER (front and rear speaker balance, where relevant), MODE audio output to show the selected frequency on the display.
   (Press button for less than 5 seconds) 9.
5. 5, 6, 7, 8, 9, 10 pre-set memorised stations (press briefly to select a pre-set station: the frequency will be shown on the display. Press longer to store the selected station).
11. Automatic pre-set station scanning.
12. Frequency band selection button.
13. Tune down button.
14. Tune up button.
15. LOUDNESS button to enhance bass tones at low volume.
16. Local or distant station button.
17. Front eject button.
18. Tape eject button.
19. Tape fast forward/reverse button.
20. Tape fast forward/reverse button.
21. Green alphanumeric liquid crystal display.