Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Description

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Description and operation: Instruments › Description
55 Electrical equipmentDescription

Description

07/98

The rev counter is only fitted in Sporting versions to better respond to the requirements of this type of model.

This instrument is located at the centre of the dashboard and is contained in a dome-shaped holder facing the driver. The signal reaches the instrument from the injection ECU. If engine rpm is too high, the ECU cuts fuel to the engine consequently decreasing the engine ratio.

The yellow instrument dial with dark yellow writing is backlit with a bulb located behind the tool.

07/98

The silver instrument dial with red writing is backlit by a bulb located behind the instrument.

Rev counter instrument dial showing numbers 0 through 8 with the label rpm x 1000
Ref.Description
-REV COUNTER

Rev counter wiring diagram

Wiring diagram for the contagiri rev counter showing connections for power, lights, negative, and signal to a lamp
Ref.Description
1POWER (15V)
2LIGHTS
3NEGATIVE
4SIGNAL

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.