Overview
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Description and operation: Sunroof and soft-top › Overview
The sunroof opening and closing is by rotating in the two directions a knob located in the centre of the roof . To remove the sun roof, unscrew the pin inside the knob and operate on the fastening lever to free the sunroof, lift it out from its support brackets, together with the sunshade panel.
After removal, the sun roof and sunshade panel can be placed in the boot and locked, by a specific elastic belt on the back of the rear seat.
OVERVIEW
| Ref. | Description |
|---|---|
| 1 | SUN ROOF |
| 2 | SUNSHADE PANEL |
| 3 | CONTROL KNOB |
| 4 | FASTENING BELT |
7030 D SUN ROOF WITH HOOD
DESCRIPTION
The hood sunroof consists of a canvas foldable covering, mounted on a frame, that completely covers the roof.
It can be opened, partially or completely,by the geared motor that pulls the slide on which the hood is fastened by means of Bowden cables.
All the components of the sunroof, except the spoiler, are housed on a frame that in its turn is fastened to the body between the roof and the roof covering. To avoid the noise caused by the impact of air on the canvas structure, there is a spoiler on the front part of the roof that suitable deviates the air flow.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.