Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)11 · 70 Bodywork
11 · Body & interior

Reassembly

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Front seats › Reassembly
70 BodyworkReassembly

(Op. 7045A24 continued)

  1. Unscrew fixing screw (2a) and lower trim molding of seat (2b).
Diagram showing the lower trim molding and fixing screw on a front seat, labeled with callouts 1, 2a, and 2b

Reassembly

  • Place lower trim molding and connect it to seat.
  • Position seat adjustment handle.

7045A26 - LEVER/HANDLE (ONE) OF A FRONT SEAT CONTROLS, LH OR RH - R.R. WITH SEAT REMOVED

Removal

  1. Unscrew fixing screw (1a) and remove lever (1b) of backrest releasing device.
  2. Unscrew the fixing screw (2a)and remove panel (2b).
Diagram showing the lever/handle assembly on a front seat with the seat removed, labeled with callouts 1a, 1b, 2a, and 2b

Reassembly

  • Connect panel of backrest releasing control with screws fixing to backrest.
  • Assemble backrest releasing device with screw fixing to backrest releasing lever.

7045A29 - LEVER OF A FRONT SEAT SLIDING CONTROL (ONE), LH OR RH - R.R.

Removal

  • Carry out Op. 7045A10 - FRONT SEAT (one), lh or rh - R.R.
  1. Remove fixing clamps.
  2. Remove lever.
Diagram showing the lever of a front seat sliding control, labeled with callouts 1 and 2

Reassembly

  • Check the lever so as to verify it is not damaged.
  • Place lever again.
  • Position fixing clamp.
  • Complete Op. 7045A10 - FRONT SEAT(one), lh or rh - R.R.
  • Test lever efficiency and seat right sliding and connection.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.