Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)14 · Wiring diagrams
14 · Electrical

Description

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
E7010 Fiat CODE › Description
Wiring diagramsDescription

DESCRIPTION

To increase protection against theft attempts, an electronic immobilizer system known as the 'FIAT CODE' system has been adopted.

The keys are fitted with an electronic Transponder device, which sends a coded signal to a special CODE electronic control unit.

The Code control unit contains a secret code used in the dialogue with the transponder in the key inserted in the ignition. If the control unit recognizes the code sent, it allows the engine to be started up

The control unit contains all enabled key codes in its memory, together with the code used in the communication between Code control unit and engine management unit. When the key is turned to ON for for the first time, if the key is identified correctly, the code is transferred to the engine management unit and is then indelibly linked to the Code control unit.

For more detailsCharacteristic of working principle 5580E Anti-theft device.

The Code control unit has supply lines protected by the maxifuse and the shunt fuse located near the i.e. control unit which also protect the injection system.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.