FRONT SEAT HEATING SYSTEM SWITCH - R+R

Operation 7045M10 · FRONT SEAT HANDLING

Removing

- Raise the seat until it is in the end of travel position.

1. Undo the front bolts fixing the seat guides.

- Move the seat lengthwise until it is in the rear end of travel position.

1. Undo the front bolts fixing the seat guides.

- Using the special tool, release the seat cable loom from the retaining clip at the base of the seat mounting.

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

- Disconnect the negative battery terminal.

1. Leaving the seat in the vehicle, disconnect the electrical connection for the seat memory switch.

1. Disconnect the electrical connection for the front seat heating system switch.

2. Remove the front seat heating system switch.

Refitting

- Fit the front seat heating system switch.

- Connect the electrical connection for the front seat heating system switch.

- Fit the seat position memory unit on the fastening clips.

- Connect the electrical connection for the front seat movement control switches.

- Connect the negative battery terminal.

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

- Attach the seat cable loom retaining clip at the base of the seat mounting.

- Move the seat lengthwise until it is in the rear end of travel position.

- Tighten the front bolts fixing the front seat guides to torque.

- Move the seat lengthwise until it is in the front end of travel position.

- Tighten the rear bolts fixing the front seat guides to torque.

Op. 7045B10 L/H OR R/H FRONT SEAT HEAD RESTRAINT - R+R

- Place the seat in the correct driving position.