SEAT EXTERIOR GUARD - R R

Operation 7045A43 · FRONT SEAT ASSEMBLY

Removing

- Raise the seat until it is in the end of travel position.

1. Undo the rear bolts fastening the front seat guides.

- Move the front seat forwards into the end of travel position.

1. Undo the front bolts fastening the front seat guides.

- Move the front seat backwards into the end of travel position.

- Using the special tool, release the seat cable loom from the retaining clip at the base of the seat mounting.

1. Remove the outer guard for one of the seats.

Refitting

- Fit the outer guard for one of the seats.

- Tighten the rear bolts fixing the front seat guides to torque.

- Move the seat lengthwise until it is in the rear end of travel position.

- Tighten the front bolts fixing the front seat guides to torque.

- Place the seat in the correct driving position.