REAR SUSPENSION COIL SPRINGS - R.R.

Operation 4420A48 · REAR DAMPERS AND SPRINGS

Removing

Position the vehicle on a lift.

See

Op. 4450B06 LEFT REAR WHEEL - R.R

See

Op. 4450B08 RIGHT REAR WHEEL - R.R

1. Position a hydraulic lift under the rear axle.

Loosen the bolts fixing the shock absorbers.

2. Use the hydraulic lift and release and remove the lower shock absorber fixing bolts.

Lower the hydraulic lift untl the coil springs are completely released.

1. Compress the coil springs and extract them.

Refitting

Fit the coil springs in the housings between the rear axle and the bodyshell.

Use the hydraulic lift and fit the lower bolts fixing the shock absorbers.

Tighten the shock absorber fixing bolts to the recommended torque.

Remove the hydraulic lift.

See

Op. 4450B08 RIGHT REAR WHEEL - R.R

See

Op. 4450B06 LEFT REAR WHEEL - R.R

Remove the vehicle from the lift.