Rear suspension end buffer - replace
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Rear suspension › Rear suspension end buffer - replace
‹ Prev Rear suspension - panhard bar transverse mounting strut - r.r. check wheel geometry separatelyNext › Front wheel geometry - check using optical equipment - includes adjustment if necessary
Suspension and wheelsRear suspension end buffer - replace
REAR SUSPENSION END BUFFER - REPLACE
Removing
- Position the vehicle on a lift.
1. Release the end of travel buffer from the housing and remove it.
Refitting
- Place the end of travel buffer in position and check that it is secured.
- Remove the vehicle from the lift.
‹ Prev Rear suspension - panhard bar transverse mounting strut - r.r. check wheel geometry separatelyNext › Front wheel geometry - check using optical equipment - includes adjustment if necessary
Parts & tools for this job For 2002 Fiat Ulysse
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTRear shock absorbersSearch: Fiat Ulysse 2002 rear shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.