Removal and Installation Removal | -
Remove the lower radiator shield (five screws). | | -
Remove the lower engine compartment shield (10 screws). | | -
Disconnect the fluid cooler pipe and hose connections. - Disconnect the right-hand side pipe union and hose connection.
- Allow the fluid to drain into a suitable container.
- Disconnect the left-hand side pipe unions.
| | -
Remove the high-pressure pipe bracket (one bolt). | | -
Remove the fluid cooler (two bolts). | Installation | -
Refit the components in the reverse order. | | -
Bleed the power steering system (refer to procedure contained in this section). | | |