ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Timing Belt > < Camshaft

Fiesta 1996 (08.1995-02.2002)

Engine - 1.4L PTE (CVH) - Camshaft Seal Fiesta 1996 (08/1995-02/2002)
In-vehicle Repair

Special Tool(s)

Installer, Oil Seal

21-094

Tension Gauge, Timing Belt

21-113

Remover, Oil Seal

21-143
Materials
Name
Specification
Sealer (Hylosil 502)
WDK-M4G320-A 
Hydraulic fluid
SWM-2C9002-AA 

Removal

  1. CAUTION:
    CAUTION:Disconnect the battery earth lead.
    Preparatory measures:
    • Make a note of the radio keycode.
    • Make a note of the preset radio stations.
  1. Remove the timing belt as described in Operation Number 21 304 0.

  1. Remove the camshaft timing belt pulley.
    NOTE:
    NOTE:Screw two bolts (10 x 45 und 10 x 50) into the special tool to hold the pulley instead of the original pins.
    empty

  1. Remove the camshaft oil seal.

  1. Install a new oil seal.
    • Coat the oil seal lip and the camshaft running surface with engine oil.
    • Insert the oil seal in the special tool and draw it in with the timing belt pulley bolt as far as the stop.

  1. NOTE:
    NOTE:Apply sealer (WSK-M4G320-A) to the thread of the new bolt.
    Fit the camshaft timing belt pulley.
  1. Secure the camshaft timing belt pulley.
  1. Finishing operations.
    • Check that the wiring and hoses are correctly routed and, where necessary, secure them with cable ties.
    • Connect the battery negative lead.
    • Enter the radio keycode.
    • Reprogramme the radio stations.
    • Adjust the clock.
    • Carry out a road test to allow the PCM to re-learn values.
    • Check the fluid levels and correct as necessary.

Timing Belt > < Camshaft