Removal and Installation Removal | -
Connect the window operating switch. | | -
Remove the door trim panel bracket. | | -
CAUTION:Do not touch the adhesive surface as re-bonding will be impaired. Detach the watershield. - Using a plastic knife (disposable cutlery), cut through the Butyl strip to enable the watershield to be peeled back.
| | -
Detach the window runner. | | -
Remove the window runner. - Using a plastic knife (disposable cutlery), cut through the Butyl strip around the door lock shield.
| | -
NOTE:Hold the window glass at the top of the opening. Detach the glass from the regulator. | | -
Lower the glass by hand to the bottom of the door. | Installation | -
To install, reverse the removal procedure. | | |