| Removal and Installation Bolt, M6 x 18 mm CKP alignment tool | | -
Raise and support the vehicle.
For additional information, refer to: Lifting (100-02, Description and Operation).
| | | -
CAUTION:Only turn the crankshaft pulley in the normal direction of rotation. CAUTION:Tighten the M6 x 18 mm bolt finger-tight only. Rotate the crankshaft pulley clockwise until the crankshaft pulley timing bolt, M6 x 18 mm can be installed through the crankshaft pulley timing hole into the engine front cover. | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - CKP sensor electrical connector 5. To install, reverse the removal procedure. Installation Details Item 3 : CKP sensor | | -
Install the CKP sensor alignment tool to the CKP sensor. | | | -
Align the CKP sensor with the crankshaft pulley sensor ring. | Item 2 : CKP sensor retaining bolts | | -
Install the CKP sensor retaining bolts. | | | -
Remove the CKP sensor alignment tool. | |
