Ford Workshop Service and Repair Manuals > Focus 2004.75 (07.2004-) > Mechanical Repairs | 5 Body and Paint | 501 Body and Paint | 501-11 Glass, Frames and Mechanisms | Description and Operation | Diagnosis and Testing | General Procedures | Removal and Installation | Front Door Window Regulator Motor

Glass, Frames and Mechanisms - Front Door Window Regulator Motor—Vehicles With: Global Closing

Focus 2004.75 (07/2004-)

Removal and Installation

Remove the front door trim panel. For additional information, refer to: (501-05 Interior Trim and Ornamentation)
Front Door Trim Panel - 3-Door (Removal and Installation),

Front Door Trim Panel - 4-Door/5-Door/Wagon (Removal and Installation).

2. Remove the components in the order indicated in the following illustration(s) and table(s).

Front door window regulator motor

3. To install, reverse the removal procedure.

NOTE:This step must be carried out if installing a new front door window regulator motor.

Configure the front door window regulator motor control module using WDS.

Initialize the door window motors.
For additional information, refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Removal Details

Ford Workshop Service and Repair Manuals