Ford Workshop Service and Repair Manuals > Focus 2004.75 (07.2004-) > Mechanical Repairs | 5 Body and Paint | 501 Body and Paint | 501-11 Glass, Frames and Mechanisms | Description and Operation | Diagnosis and Testing | General Procedures | Removal and Installation

Glass, Frames and Mechanisms - Rear Door Window Regulator Motor

Focus 2004.75 (07/2004-)

Removal and Installation

Remove the rear door trim panel. For additional information, refer to Section 501-05 Interior Trim and Ornamentation.

2. Remove the components in the order indicated in the following illustration(s) and table(s).

3. To install, reverse the removal procedure.

NOTE:This step should only be carried out if installing a new window regulator motor.

Configure the window regulator motor control module using worldwide diagnostic system (WDS).

Initialize the door window motors.
For additional information, refer to Door Window Motor Initialization in this section.

Ford Workshop Service and Repair Manuals