Removal and Installation | -
Remove the headlamp assembly. For additional information, refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation). | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Headlamp washer jet pressure hose 3. To install, reverse the removal procedure. Removal Details Item 1 : Cover, headlamp washer system nozzle | -
Pull out and hold the headlamp washer jet telescopic rod. | Item 3 : Headlamp washer jet | -
Unclip the headlamp washer jet from behind. | Installation Details Item 1 : Cover, headlamp washer system nozzle | -
Push the headlamp washer jet cover together with the telescopic rod to the stop on the bumper cover. | |